|
SKU:
11195
Part Name: Siemens Deka High Impedance 60lb. Injectors
Description:
Siemens Deka Injector sets have been carefully blueprinted and flow-matched to better-than manufacturers specifications. Fuel injectors need to be replaced due to wear (old age), contamination, leakage, or adding more Power.
Price: $429.95
|
|
SKU:
11196
Part Name: Siemens Deka 60lb. Injectors & Harness Kit
Description:
Set of 8 Injectors and 8 Adapters.
Siemens Deka Injector sets have been carefully blueprinted and flow-matched to better-than manufacturers specifications. Fuel injectors need to be replaced due to wear (old age), contamination, leakage, or adding more Power.
03-04 SVT Cobra and 05 Mustang GT's require an Injector Harness Kit for installation.
Price: $529.95
|
|
SKU:
11197
Part Name: Lightning Force Performance Injector Harness Kit
Description:
When upgrading the Injectors, 03-04 SVT Cobra and 05 Mustang GT's require an Injector Harness Kit for installation.
Price: $124.95
|
|
SKU:
11101
Part Name: SVT Lightning & Harley Deluxe Cold Air Kit
Description:
This billet deluxe cold air kit features a billet aluminum adaptor (to MAF), 12” Powerstack air filter, new air charge sensor, new and improved stainless steel mounting bracket, and filter to fender air inlet tube. Increase overall airflow through filter and fender well. Quicker throttle response, cut boost up time, and increase boost.
-CNC Machined Billet Aluminum 90mm MAF Adaptor
-Cotton Pleated Conical 12" Power Stack Filter
-Complete with Hardware and SS Clamp
-Replaces Restrictive Factory Air Box
-Immediate Performance Results - 2.5 tenths Quicker ET's
-15 minute installation with NO Modifications required
-Definite Seat-Of-The-Pants Improvement over Factory Air Box
Price: $169.00
|
|
SKU:
11102
Part Name: Power Stack Filter
Description:
12” Powerstack air filter replacement. This is a replacement part for
the billet cold air kit.
Price: $49.00
|
|
SKU:
11103
Part Name: Power Stack Filter w/sensor
Description:
12” Powerstack air filter replacement. This is a replacement part for
the billet cold air kit. This filter comes with new air charge sensor.
Price: $69.00
|
NO PHOTO
|
SKU:
11105
Part Name: Ford Motorsport Fuel Filter
Description:
Recommended change every 6K or every other oil change.
Price: $11.75
|
|
SKU:
11138
Part Name: Oil Separator
Description:
Under boost or just cruizing around town, your vacuum line on the drivers side valve cover is pulling oil into itself which ultimately collects in plenum, intercooler throttle body...etc. Install
an oil separator and catch it before it heads that direction. Installs in 30 min.
Price: $39.95
|
|
SKU:
11147
Part Name: 03-04 SVT Cobra Cold Air Kit
Description:
10" Powerstack Intake Filter Kit for the Ford Cobra feature the following:
CNC Machined Billet Aluminum 90mm MAF Adaptor
Cotton Pleated Conical 10" Power Stack Filter
Complete with Hardware and SS Clamp
Replaces Restrictive Factory Air Box
Immediate Performance Results - 2.5 tenths Quicker ET's
15 minute installation with NO Modifications required
Definite Seat-Of-The-Pants Improvement over Factory Air Box
Price: $79.00
|
|
SKU:
11198
Part Name: Walbro 255LPH Dual Fuel Pumps with Install Kit
Description:
Kit is complete with Twin 255LPH Fuel Pumps to replace your stock 155's, Retainer Clips, Pump Boots, Pump Filters, and a new Fuel Tank Seal.
Heavily Modified Lightning & Harley Trucks require additional fuel delivery from larger injectors and increased fuel pressure. The stock fuel pumps can support only a slight increase in fuel pressure. Replacing the stock pumps with a Walbro 255 High Flow Pumps ensures the proper amount fuel is delivered maximizing power output.
Price: $249.95
|
|
SKU:
11203
Part Name: 2005 Ford Mustang GT C&L Deluxe Cold Air Intake
Description:
We recommend upgrading to the C&L Induction System with Diablo Tuner or we can custom tune an SCT Xcalibrator 2 for you.
Owners of the cool new 2005 GT Mustang will love the complete package that we have developed for these vehicles. So much more than a "cold air" kit, this is a complete system that truly addresses every aspect of improving the air intake on the all-new Mustang. As a complete throttle-body forward package, the entire factory air intake assembly is replaced with all new components. While others will try to sell a "cold air" package that consists of a cone filter and an exhaust pipe tube based mass airflow housing, only our package comes with an all-new (patent pending) cast inlet pipe and a larger CNC machined aluminum mass airflow housing. Also included in this package is a new high flow conical filter assembly, custom filter shroud that separates it from the engine compartment heat, MAF mounting bracket, mounting hardware, installation tool and instructions.
Actual Measured Horsepower: These graphs show the Corrected rear wheel horsepower and torque gained when installing our complete air intake assembly by
itself without adjusting the timing or leaning out the air/fuel ratio for maximum horsepower. Larger gains are realized when tuning is applied
Price: $349.95
|
|
SKU:
11206
Part Name: 2005 Ford Mustang GT C&L Cold Air Induction System
Description: 25+HP & 23+Ft.lbs. Torque
So much more than a "cold air" kit, this is a complete system that truly addresses every aspect of improving the air intake on the all-new Mustang. As a complete throttle-body forward package, the entire factory air intake assembly is replaced with all new components. While others will try to sell a "cold air" package that consists of a cone filter and an exhaust pipe tube based mass airflow housing, only our package comes with an all-new (patent pending) cast inlet pipe and a larger CNC machined aluminum mass airflow housing. Also included in this package is a new high flow conical filter assembly, custom filter shroud that separates it from the engine compartment heat, MAF mounting bracket, mounting hardware, installation tool and instructions.
Actual Horsepower dyno test of the new C&L Trueflow intake system and Predator tune on the new 2005 GT, showing a gain of 26 rear wheel HP versus the stock peak and a 30 HP gain at 6,100 RPM.
Dyno testing the 2005 GT has shown that the computer is so sensitive to airflow changes that a computer modification is necessary in order to control the air/fuel ratio at the proper level. Installing this air intake assembly on a 2005 GT without any tuning will result in a leaner-than-ideal 14:1 air/fuel ratio. While certainly not lean enough to cause engine
durability concerns, it is leaner than what is desired for optimum performance. Even when replacing the air filter ONLY to a higher flow assembly, the air/fuel ratio leans out at an alarming rate. This means that any 2005 Mustang owner who is interested in modifying their new car for better performance will have to use some form of tuning, and we feel that we have found the best solution.
Actual Torque dyno test of the new C&L Trueflow intake system and Predator tune on the new 2005 GT, showing a gain of 22 ft/lbs of torque versus the stock peak and approximately 25 more ft/lbs from 4,000 RPM to redline.
To make things as easy as possible for the end user, we have worked closely with Diablosport to offer a simple computer adjustment and tuning option for the 2005 Mustang GT. Available with our new air intake assembly, we are providing a special Diablosport Predator that comes pre-loaded with a
specific tune for our air intake upgrade. With this tuner, you will have the ability to not only make the adjustments necessary for the new air inlet assembly, but also control the air/fuel ratio and timing level based upon the octane quality of the fuel that you are using. Most importantly, what also makes this system superior to other options is that you have the personal capability to make further adjustments in the future to both your air/fuel and timing levels as you make other changes to your vehicle. This means that any changes that you make in the future can be easily compensated for using the tuner without the need to rely on someone else to "re-flash" your handheld tuner. This keeps you from having to rely on others to make future adjustments, and puts YOU in control!
Price: $649.95
|
We are
currently updating the website and adding more products as well as
integrating a shopping cart to make your shopping easier. So stay tuned in
and check back soon for more additions. While we do not have the shopping
cart live yet, please call us for all your orders or questions
about these products.
|
